Red X Grey, 39 mm
incl. VAT
on a leather strap
Delivery time: 4-5 days
Size guide for straps
To determine your strap length, you can either measure your wrist circumference and determine your strap length in the table or use our templates, which you can download below.
Please find our templates for download here:
Instructions: Print out the document and make sure that no page scaling is preset. Cut out the template along the red dotted line. Place the watch on your wrist and pull the strap through the cut slit. Make sure that the template is not too tight on your wrist and that you have a little space between your fingers. Please note that leather underlays result in a longer strap length.
Strap lengths:
PIONEER/417 ES: S = (10,5 / 6,5 cm) M = (11,5 / 7,5 cm) L = (12,5 / 9,0 cm)
PRIMUS: S = (9,5/7,5 cm) M = (10,5/8,5 cm) L = (12,0/10,0 cm)
Racemaster: S= (10,4/6,4 cm) M= (11,4/7,4 cm) L= (12,4/8,4 cm)
| Model | Lug width | Wrist circumference S-strap | Wrist circumference M-strap | Wrist circumference L-strap |
| General recommendation, regardless of model and strap | - | 13.0 cm - 16.0 cm | 16.5 cm - 18.5 cm | 19.0 cm - 22.0 cm |
| PIONEER Silva | 20 mm | - | 15.0 cm - 21.0 cm | 18.0 cm - 23.5 cm |
| 417 ES 1954 (with Bund strap) | 20 mm | - | 14.0 cm - 20.0 cm | 17.0 cm - 22.0 cm |
| PIONEER Mk I, Mk II, TachyTele, Preventor9 | 20 mm | 13.0 cm - 17.0 cm | 14.0 cm - 20.5 cm | 17.0 cm - 22.5 cm |
| Preventor HD12™ | 20 mm | - | 14.0 cm - 20.0 cm | 17.0 cm - 22.0 cm |
| 417 ES (with Bund strap) | 21 mm | - | 14.0 cm - 20.0 cm | 18.0 cm - 23.0 cm |
| PIONEER TwinControl, MonoControl | 21 mm | 13.0 cm - 19.0 cm | 15.5 cm - 21.5 cm | 19.0 cm - 23.5 cm |
| PIONEER One | 21 mm | 13.0 cm - 19.0 cm | 15.5 cm - 20.5 cm | 18.0 cm - 23.5 cm |
| PIONEER TwinDicator, MonoScope | 23 mm | 13.0 cm - 19.0 cm | 15.5 cm - 21.5 cm | 18.0 cm - 24.0 cm |
| RACEMASTER | 23 mm | 13.0 cm - 18.0 cm | 16.5 cm - 21.5 cm | 18.5 cm - 23.5 cm |
| PRIMUS leather | 24 mm | 13.0 cm - 17.5 cm | 16.0 cm - 20.0 cm | 18.0 cm - 22.5 cm |
| PRIMUS rubber | 24 mm | - | 14.0 cm - 18.5 cm | 17.5 cm - 21.5 cm |
| PRIMUS textile | 24 mm | - | 14.5 cm - 19.5 cm | 17.5 cm - 21.5 cm |
Description
DOUBLE SPEED CONTROL
Red X Grey
With a twin set limited to 140 pieces, the traditional manufacturer Hanhart from the Black Forest is focusing on its manufacturing expertise in the stopwatch sector. The wristwatch and stopwatch combinations are not just the perfect companion for rally enthusiasts: equipped with a dashboard and table stand, the high-quality flyback stopwatch is also an eye-catching desk accessory.
GLOBAL PLAYER
HANHART AND STOPWATCHES
When Hanhart produced the first affordable stopwatch in 1924, the watch manufacturer from Gütenbach quickly became the most important German manufacturer and market leader for mechanical and electronic timepieces. Hanhart became a global player within the last century, when the manufacture stopwatches were part of the basic equipment of every referee or race director at all important sporting events and car races.
STRICTLY LIMITED
TWIN-SET IN GREY
The new limited edition twin set consists of a wrist chronograph, an addition stopper, a dashboard plate and a table stand. The sets are available with an anthracite-colored dial. The dial shines with a sunburst pattern, which shows different facets depending on the incidence of light and brightness.
TEMPO SWITCHING
GEAR WHEEL WITH FLYBACK IN DOUBLE VERSION
In keeping with its long tradition in the production of chronographs, Hanhart launches the chronographs and the addition stopper with flyback function. The speed control - as the flyback function is also known - has been an important function on racetracks throughout history. The mechanism allows a new time interval to be measured immediately by pressing the reset button: this means that lap times can be measured precisely without interruption.
SIMPLY EFFICIENT
MANUFACTURE CALIBER OF THE EXTRA CLASS
Hanhart's own manufacture caliber 122 is used in the addition stopper. The wrist chronograph features the first-class AMT5100 M caliber from Sellita's ``Manufacture AMT`` department. The watch controls the chronograph via a control wheel. When fully wound, the stopwatch has a power reserve of at least 10 hours and the wristwatch has a power reserve of at least 58 hours. Both calibers are traditionally wound by hand. They are robust, reliable and a joy for every chronograph fan.
A LEGEND BECOMES A TRADEMARK
THE RED PUSHER
He tenderly pressed a kiss to her sleeping forehead before quietly leaving the apartment. When he looked at his Hanhart chronograph in the hangar, a smile flitted across his lips: she had painted the pusher with her red nail polish so that he would always think of her and return safely ... This is how the anecdote of the striking trademark that has characterized Hanhart since the introduction of the chronographs is told: the red pusher. It was painted to prevent pilots in particular from accidentally resetting the stop time.
Product safety
Technical data
CASE
DIMENSIONS
- Diameter 39 mm
- Height 14.5 mm
- Lug to Lug: 46 mm
MATERIAL
- Stainless steel, satin/polished
BEZEL
- Fluted bezel with red marking
GLASS
- Convex sapphire crystal with anti-reflective coating on one side
CASE BACK
-
Screw-down back, anti-reflective sapphire crystal on the inside
-
Limitation number XXX/140
WATER RESISTANCE
- Water-resistant up to 10 bar/10 ATM in accordance with DIN 8310
MOVEMENT
CALIBER
- Manual winding
- Sellita AMT 5100 M
- Symmetrical pusher spacing
- 28,800 A/h, 4 Hz, 23 jewels
POWER RESERVE
- 58 hours after full winding
FUNCTIONS
- Small second
- 30-minute counter
- Central stop second
DIAL
DIAL
- Anthracite with historical logo
NUMBERS
- Super-LumiNova® SLN BGW9 coated
HANDS
- Super-LumiNova® SLN BGW9 coated
STRAP
STRAP
- Cowhide in suede look with red cross stitching on the lugs
- Lug width 20 mm
COLORS
- Gray
BUCKLE
-
Stainless steel pin buckle
