Racemaster GT
incl. VAT
on a leather strap
Delivery time: 4-5 days
Size guide for straps
To determine your strap length, you can either measure your wrist circumference and determine your strap length in the table or use our templates, which you can download below.
Please find our templates for download here:
Instructions: Print out the document and make sure that no page scaling is preset. Cut out the template along the red dotted line. Place the watch on your wrist and pull the strap through the cut slit. Make sure that the template is not too tight on your wrist and that you have a little space between your fingers. Please note that leather underlays result in a longer strap length.
Strap lengths:
PIONEER/417 ES: S = (10,5 / 6,5 cm) M = (11,5 / 7,5 cm) L = (12,5 / 9,0 cm)
PRIMUS: S = (9,5/7,5 cm) M = (10,5/8,5 cm) L = (12,0/10,0 cm)
Racemaster: S= (10,4/6,4 cm) M= (11,4/7,4 cm) L= (12,4/8,4 cm)
Model | Lug width | Wrist circumference S-strap | Wrist circumference M-strap | Wrist circumference L-strap |
General recommendation, regardless of model and strap | - | 13.0 cm - 16.0 cm | 16.5 cm - 18.5 cm | 19.0 cm - 22.0 cm |
PIONEER Silva | 20 mm | - | 15.0 cm - 21.0 cm | 18.0 cm - 23.5 cm |
417 ES 1954 (with Bund strap) | 20 mm | - | 14.0 cm - 20.0 cm | 17.0 cm - 22.0 cm |
PIONEER Mk I, Mk II, TachyTele, Preventor9 | 20 mm | 13.0 cm - 17.0 cm | 14.0 cm - 20.5 cm | 17.0 cm - 22.5 cm |
Preventor HD12™ | 20 mm | - | 14.0 cm - 20.0 cm | 17.0 cm - 22.0 cm |
417 ES (with Bund strap) | 21 mm | - | 14.0 cm - 20.0 cm | 18.0 cm - 23.0 cm |
PIONEER TwinControl, MonoControl | 21 mm | 13.0 cm - 19.0 cm | 15.5 cm - 21.5 cm | 19.0 cm - 23.5 cm |
PIONEER One | 21 mm | 13.0 cm - 19.0 cm | 15.5 cm - 20.5 cm | 18.0 cm - 23.5 cm |
PIONEER TwinDicator, MonoScope | 23 mm | 13.0 cm - 19.0 cm | 15.5 cm - 21.5 cm | 18.0 cm - 24.0 cm |
RACEMASTER | 23 mm | 13.0 cm - 18.0 cm | 16.5 cm - 21.5 cm | 18.5 cm - 23.5 cm |
PRIMUS leather | 24 mm | 13.0 cm - 17.5 cm | 16.0 cm - 20.0 cm | 18.0 cm - 22.5 cm |
PRIMUS rubber | 24 mm | - | 14.0 cm - 18.5 cm | 17.5 cm - 21.5 cm |
PRIMUS textile | 24 mm | - | 14.5 cm - 19.5 cm | 17.5 cm - 21.5 cm |
FOR EVERYONE WITH GASOLINE IN THEIR BLOOD
Racemaster GT
CLOSE TIES TO RACING
HANHART AND MOTORSPORT
DYNAMIC, COOL, BOLD
SPORTY LOOK
design phase that her look would be inspired by sporty technology. Its face - a nod to the design of historic motor sports cars: dynamic, cool, bold. The result is a watch with a distinctive case and unmistakable leather strap with a racing design and red lining. With a dial that is a successful reminiscence of early speedometer displays in its tidiness, with the arrow-shaped, noctilucent hands, with the simple, easy-to-read Arabic numerals and the applied hour markers, with the color division into individual segments and with the typical Hanhart display shape with two counters at 3 and 9 o'clock, a tachymeter scale on the periphery and the unusual rondelle in the center. And of course with the characteristic Hanhart hallmarks - the asymmetrical pusher arrangement and the red reset pusher. In the Racemaster GT, which is equipped with two pushers, the small round at 9 o'clock is not reserved for the small seconds, as is usually the case, but also houses a practical 12-hour counter. The upper chronograph pusher, which is offset asymmetrically towards the lug, is striking - a Hanhart exclusivity. To achieve this arrangement, a specially designed deflection lever is integrated into the case. This redirects the force coming from the pusher at 2 o'clock by the necessary millimeters.
SCRATCH-RESISTANT CASE
STAINLESS STEEL HDSPro®
preserved for a long time, Hanhart was the first watch brand in the world to use an innovative stainless steel for the case of this model, which represents an optimum combination of hardness, corrosion resistance and nickel resistance. Thanks to a special refinement process, this steel is characterized in particular by a surface structure that is at least three times harder and the associated scratch resistance that is more than 100 times better and therefore over 10,000% more resistant. The use of this finishing process is patented under the brand name HDSPro® for the watch and jewelry sector. In addition to the extremely high scratch resistance, the refined steel also has a high corrosion resistance that is comparable to that of the best stainless steels. As the steel is not coated during the finishing process, not only is the look and feel of the material retained, but any coating applied cannot flake off. Last but not least, this steel does not require the addition of nickel, which is why watch cases made from this material have no known allergy potential.
CASE
DIMENSIONS
- Diameter 45 mm
- Height 16 mm
MATERIAL
- Stainless steel HDSPro®
BEZEL
- Smooth bezel
GLASS
- Convex sapphire crystal with anti-reflective coating on both sides
CASE BACK
-
Screwed case back
-
Engraving with two crossed start and finish flags
WATER RESISTANCE
- Water-resistant up to 10 bar/10 ATM in accordance with DIN 8310
MOVEMENT
CALIBER
- Converted automatic chronograph movement HAN4011 with exclusive module attachment
- Asymmetrical lever handle arrangement
- Flywheel with skeletonized Hanhart logo
- 28,800 A/h, 4 Hz, 35 jewels
POWER RESERVE
- 42 hours after full winding
FUNCTIONS
- Small seconds and 12-hour counter at 9 o’clock
- 30-minute counter at 3 o’clock
- Tachymeter scale
DIAL
DIAL
- Anthracite/white with modern logo
NUMBERS
- Super-LumiNova® coated
HANDS
- Super-LumiNova® coated
STRAP
STRAP
- Calfskin with racing design
COLORS
- Black
BUCKLE
-
Stainless steel pin buckle