Sold out
PIONEER Preventor9 antique white, 40 mm
incl. VAT
on a leather strap
Size guide for straps
To determine your strap length, you can either measure your wrist circumference and determine your strap length in the table or use our templates, which you can download below.
Please find our templates for download here:
Instructions: Print out the document and make sure that no page scaling is preset. Cut out the template along the red dotted line. Place the watch on your wrist and pull the strap through the cut slit. Make sure that the template is not too tight on your wrist and that you have a little space between your fingers. Please note that leather underlays result in a longer strap length.
Strap lengths:
PIONEER/417 ES: S = (10,5 / 6,5 cm) M = (11,5 / 7,5 cm) L = (12,5 / 9,0 cm)
PRIMUS: S = (9,5/7,5 cm) M = (10,5/8,5 cm) L = (12,0/10,0 cm)
Racemaster: S= (10,4/6,4 cm) M= (11,4/7,4 cm) L= (12,4/8,4 cm)
| Model | Lug width | Wrist circumference S-strap | Wrist circumference M-strap | Wrist circumference L-strap |
| General recommendation, regardless of model and strap | - | 13.0 cm - 16.0 cm | 16.5 cm - 18.5 cm | 19.0 cm - 22.0 cm |
| PIONEER Silva | 20 mm | - | 15.0 cm - 21.0 cm | 18.0 cm - 23.5 cm |
| 417 ES 1954 (with Bund strap) | 20 mm | - | 14.0 cm - 20.0 cm | 17.0 cm - 22.0 cm |
| PIONEER Mk I, Mk II, TachyTele, Preventor9 | 20 mm | 13.0 cm - 17.0 cm | 14.0 cm - 20.5 cm | 17.0 cm - 22.5 cm |
| Preventor HD12™ | 20 mm | - | 14.0 cm - 20.0 cm | 17.0 cm - 22.0 cm |
| 417 ES (with Bund strap) | 21 mm | - | 14.0 cm - 20.0 cm | 18.0 cm - 23.0 cm |
| PIONEER TwinControl, MonoControl | 21 mm | 13.0 cm - 19.0 cm | 15.5 cm - 21.5 cm | 19.0 cm - 23.5 cm |
| PIONEER One | 21 mm | 13.0 cm - 19.0 cm | 15.5 cm - 20.5 cm | 18.0 cm - 23.5 cm |
| PIONEER TwinDicator, MonoScope | 23 mm | 13.0 cm - 19.0 cm | 15.5 cm - 21.5 cm | 18.0 cm - 24.0 cm |
| RACEMASTER | 23 mm | 13.0 cm - 18.0 cm | 16.5 cm - 21.5 cm | 18.5 cm - 23.5 cm |
| PRIMUS leather | 24 mm | 13.0 cm - 17.5 cm | 16.0 cm - 20.0 cm | 18.0 cm - 22.5 cm |
| PRIMUS rubber | 24 mm | - | 14.0 cm - 18.5 cm | 17.5 cm - 21.5 cm |
| PRIMUS textile | 24 mm | - | 14.5 cm - 19.5 cm | 17.5 cm - 21.5 cm |
Description
SIMPLY UNUSUAL
PIONEER Preventor9
For the models in the Pioneer collection, Hanhart draws on historical models from its own company - including the new Preventor9. Its small second is positioned in an unusual place.
DESIGN CREATED BY LACK OF MATERIAL
LIMITLESS CREATIVITY
When movements and their components became scarce in the late 1930s and 1940s due to material shortages, Hanhart had to find creative solutions in order to continue manufacturing timepieces. Because the components of the 30-minute counter for the brand's famous chronographs were missing, the watchmakers simply omitted it and left the small seconds at 9 o'clock as usual. The result is a three-hand watch with an unmistakable face.
TYPICALLY HANHART
SIMPLE BUT CHIC
Surprisingly, the small seconds dial on this watch is located at 9 o'clock. The Pioneer Preventor9 is also unmistakably based on its legendary model and is therefore instantly recognizable as a Hanhart watch. The large, handy crown with deep bevel guarantees easy and safe handling. The bezel is elegant and simple with a smooth surface. The antique white or black dial is easy to read in any situation thanks to large Arabic numerals that glow in the dark, striking hands that are also coated with Super-LumiNova®, the continuous minute track and the clearly set off small seconds display. The Preventor9 underlines its exclusivity with the elegant contrast between satin-finished and polished case surfaces.
GUARANTEED PROTECTION
ROBUST & WATERPROOF
Like its predecessors, it has a closed, screwed case back with three recesses for the case key to ensure maximum water resistance and robustness. The Preventor9 is water-resistant up to 10 bar, making it the perfect companion for indoors and outdoors.
QUALITY LEATHER OR STAINLESS STEEL
PERFECT HOLD ON THE WRIST
A strap made of black cowhide ensures optimum wearing comfort from day one. A stainless steel pin buckle with the Hanhart logo provides a secure hold. Alternatively, a stainless steel bracelet and leather straps are available in other colors.
Product safety
Technical data
CASE
DIMENSIONS
- Diameter 40 mm
- Height 12.5 mm
MATERIAL
- Stainless steel
BEZEL
- Smooth bezel
GLASS
- Sapphire crystal with anti-reflective coating on one side
CASE BACK
- Screwed case back
WATER RESISTANCE
- Water-resistant up to 10 bar/10 ATM in accordance with DIN 8310
MOVEMENT
CALIBER
- Automatic movement HAN4112
- Base: Sellita SW 200 with superstructure from Dubois Dépraz
- 28,800 A/h, 4 Hz, 30 jewels
POWER RESERVE
- 38 hours after full winding
FUNCTIONS
- Small second
DIAL
DIAL
- Old white
NUMBERS
- Super-LumiNova® coated
HANDS
- Super-LumiNova® coated
STRAP
STRAP
- Calfskin
- Lug width 20 mm
COLORS
- Black with rivets
- Dark brown with rivets
- Light brown with rivets
BUCKLE
- Stainless steel pin buckle
Frequently bought together
