PIONEER MonoScope silver, smooth bezel, 45 mm
$3.803
incl. VAT
on a steel bracelet
Delivery time: 4-5 days
In stock
Size chart for bracelets
To determine your strap/bracelet length, you can either measure your wrist circumference and determine your bracelet length in the table or use our templates, which you can download below.
Please find our templates for download here:
Instructions: Print out the document and make sure that no page scaling is preset. Cut out the template along the red dotted line. Place the watch on your wrist and pull the strap through the cut slit. Make sure that the template is not too tight on your wrist and that you have a little space between your fingers.
Please note that leather underbands result in a longer strap length.
Strap lengths:
417 ES/415 ES/PIONEER: S = (10.5 / 6.5 cm) M = (11.5 / 7.5 cm) L = (12.5 / 9.0 cm)
AQUASPHERE(FLY NAVY Aerosphere rubber strap: M = (10.0/8.0 cm) L = (11.5/9.5 cm)
PRIMUS: S = (9.5/7.5 cm) M = (10.5/8.5 cm) L = (12.0/10.0 cm)
RACEMASTER: S= (10.4/6.4 cm) M= (11.4/7.4 cm) L= (12.4/8.4 cm)
| Model | Lug width | Wrist circumference S-band | Wrist circumference M-band | Wrist circumference L-band |
| General recommendation, regardless of model and band | 13.0 cm - 16.0 cm | 16.5 cm - 18.5 cm | 19.0 cm - 22.0 cm | |
| PIONEER Silva | 20 mm | 13.0 cm - 17.0 cm | 15.0 cm - 21.0 cm | 18.0 cm - 23.5 cm |
| 417 ES 1954 (with leather strap) | 20 mm | 13.0 cm - 17.0 cm | 14.0 cm - 20.0 cm | 17.0 cm - 22.0 cm |
| PIONEER Mk I, Mk II, TachyTele, Preventor9, 415 ES | 20 mm | 13.0 cm - 17.0 cm | 14.0 cm - 20.5 cm | 17.0 cm - 22.5 cm |
| Preventor HD12™ | 20 mm | 13.0 cm - 17.0 cm | 14.0 cm - 20.0 cm | 17.0 cm - 22.0 cm |
| 417 ES (with bund strap) | 21 mm | 13.0 cm - 19.0 cm | 14.0 cm - 20.0 cm | 18.0 cm - 23.0 cm |
| PIONEER TwinControl, MonoControl | 21 mm | 13.0 cm - 19.0 cm | 15.5 cm - 21.5 cm | 19.0 cm - 23.5 cm |
| PIONEER One | 21 mm | 13.0 cm - 19.0 cm | 15.5 cm - 20.5 cm | 18.0 cm - 23.5 cm |
| PIONEER TwinDicator, MonoScope | 23 mm | 13.0 cm - 19.0 cm | 15.5 cm - 21.5 cm | 18.0 cm - 24.0 cm |
| AQUASPHERE/FLY NAVY Aerosphere rubber strap | 20 mm | n/a | 15.5 cm - 19.5 cm | 17.5 cm - 22.0 cm |
| RACEMASTER | 23 mm | 13.0 cm - 18.0 cm | 16.5 cm - 21.5 cm | 18.5 cm - 23.5 cm |
| PRIMUS leather | 24 mm | 13.0 cm - 17.5 cm | 16.0 cm - 20.0 cm | 18.0 cm - 22.5 cm |
| PRIMUS rubber | 24 mm | n/a | 14.0 cm - 18.5 cm | 17.5 cm - 21.5 cm |
| PRIMUS Textile | 24 mm | n/a | 14.5 cm - 19.5 cm | 17.5 cm - 21.5 cm |
Description
ONE FOR ALL
PIONEER MonoScope
Like its legendary predecessors from Hanhart, the PIONEER MonoScope has a single pusher to control all chronograph functions. With the widely spaced displays for the small seconds and the 30-minute counter, the new model in the PIONEER collection also incorporates another eye-catching feature of the Swiss-German watch brand's early precision timepieces.
EXCEPTIONAL DESIGN
SINGLE-PUSH-BUTTON MODEL
The technical implementation with a single pusher is also the characteristic feature of the PIONEER MonoScope. The automatic movement ticking in its generously proportioned 45-millimeter stainless steel case has been slightly redesigned for this purpose. The lever, which is located directly below the pusher that is normally positioned at 4 o'clock, has no function. The third stroke on the chronograph cam is thus performed by the large gearshift. To do this, this cam is modified so that an additional prong runs along its lowest level. This allows the shift lever to control not two, but three positions.
MODEL FROM THE 30S
STRIKING
DIAL
However, this is not the only special feature of the new model in the PIONEER collection. A further modification to the caliber allows the two displays for the small seconds and the 30-minute counter typical of Hanhart chronographs to be positioned on the periphery of the dial. Their aesthetics thus perfectly match those of their predecessors from the 1930s, which owed this arrangement to the early 15.5-line manufacture caliber from Hanhart. On the PIONEER MonoScope, the centers of the two displays together with the numbers 2 and 4 or 8 and 10 form a straight, vertical axis, resulting in a balanced symmetry.
A LEGEND BECOMES A TRADEMARK
THE RED PUSHER
The red reset button on the side is a striking feature of the PIONEER collection. Legend has it that when a young pilot put on his Hanhart one morning, he discovered that his wife had painted one of the pushers with red nail polish so that he would always think of her and return unharmed. This striking red pusher became Hanhart's trademark from 1939 onwards. It prevented the pilots from unintentionally resetting the stopped time during the flight and thus leaving the correct course.
WATERPROOF UP TO 10 BAR
ROBUST HOUSING
Like its predecessors, it has a closed, screwed case back with three recesses for the case key to ensure maximum water resistance and robustness.
QUALITY LEATHER OR STAINLESS STEEL
COMFORTABLE TO WEAR
With its riveted strap made of sturdy, durable calfskin, the PIONEER MonoScope is comfortable to wear from day one. A high-quality pin buckle ensures that the watch is held securely in place. For further design options, we also offer waistband bracelets in dark brown and light brown. The MonoScope is also available with a stainless steel bracelet.
Technical data
CASE
DIMENSIONS
- Diameter 45 mm
- Height with glass 16 mm
MATERIAL
- Stainless Steel
BEZEL
- Smooth bezel
GLASS
- Convex sapphire crystal with anti-reflective coating on both sides
CASE BACK
- Screwed case back
WATER RESISTANCE
- Water-resistant up to 10 bar/10 ATM in accordance with DIN 8310
MOVEMENT
CALIBER
- Automatic chronograph movement HAN4212
- ETA7750 with La Joux-Perret module
- Single lever handle conversion
- 28,800 A/h, 4 Hz, 31 bricks
POWER RESERVE
- 42 hours after full winding
FUNCTIONS
- Small second
- 30-minute counter
DIAL
DIAL
- silver
NUMBERS
- Super-LumiNova® coated
HANDS
- Super-LumiNova® coated
STRAP
STRAP
- Stainless Steel
- Lug width 23 mm
COLORS
- Stainless Steel
BUCKLE
- Folding clasp
Frequently bought together
