PIONEER One Bronze: Strictly limited to 150 pieces!
A new special edition, limited to only 150 pieces, now complements our PIONEER collection: the PIONEER One Bronze. The legendary 417, the first pilot chronograph of the German Armed Forces in the 1950s, serves as the historical model. The warm bronze case paired with an olive green dial and a striking saddle leather strap give the watch a unique design.
UNIQUE PIECE WITH ITS OWN PATINA
The PIONEER One Bronze is limited to 150 pieces and each model will become unique with its own patina: the finely crafted case is made out of warm CuSn8 bronze with the exception of the case back which is manufactured in sandblasted stainless steel.
By wearing the watch, an oxidation process is set in motion which changes the appearance of the case over time. External factors such as wearing habits and place of residence allow each PIONEER One Bronze to age individually in a fascinating way.
Inside the PIONEER One Bronze works the reliable SW 200 from the renowned Swiss manufacturer Sellita in the best Swiss-made quality. In addition to a stop-second device for accurate time setting, it offers a power reserve of up to 38 hours.
The case back is made of matt sandblasted stainless steel bears the respective limited edition number XXX/150, the historical “h” and protects against unwanted color stains on the skin.
MADE FOR PILOTS
The large crown, also featuring the “h” of the historic Hanhart logo, is used for error-free control.
The classic and for Hanhart typical fluted bezel with red marking is continuously rotatable without click in both directions.
These elements were originally developed for pilots and are still typical features of pilot watches today.
VINTAGE CHARME WITH MAXIMUM WEARING COMFORT
The PIONEER One Bronze has the historical logo in contrast to the series watch. On the wrist, a dark brown vintage-look saddle leather strap makes it comfortable to wear. The strap is decorated with a triple bartack seam at the beginning and a V-seam at the tip of the strap. The good grip is ensured by the bronze PVD-coated pin buckle.
THE HISTORICAL "h"
The curved, historic Hanhart logo was the first to be used for the wristwatches of the time, but also for stopwatches until the 1960s.
On the limited edition PIONEER One Bronze, the historic logo is on the dial and the buckle. The historic “h” you can find on the large crown and the stainless steel case back.
STRICTLY LIMITED TO 150 PIECES
The hands and numerals of the limited PIONEER One Bronze are coated with Super-LumiNova® greenline C3.
This ensures optimal readability at day and night time.
Diameter 42 mm
Height 12,00 mm
Fluted rotating bezel, continuously rotatable, with red marking
Anti-reflective convex sapphire glass
Screwed-down and blasted stainless steel case back
Engraving of the historical Hanhart “h” and the limitation number XXX/150
WATER RESISTANT / SHOCKPROOF
Water resistant to 10 bar/10 ATM
Green with our historical logo
Automatic movement Sellita SW 200
28,800 vibrations per hour, 4 Hz, 26 jewels
Min. 38 hours
Three hands, centre hour, minute, second hands and stop-second device
Saddle leather strap dark brown in vintage-look, with triple bartack seam at the begunning an V-seam at the band tip
Lug width 22 mm
Pin-buckle with a bronze-color PVD coating and historical logo
Thanks to everyone for the great feedback! The PIONEER One Bronze is sold out after just one weekend.
The special model is limited to 150 pieces. The watches are manufactured by Hanhart with a focus on the best robustness and readability.